Description
| Catalog Name | BPC-157 + TB-500 |
| Blend Type | Two-component synthetic peptide mixture, fixed ratio |
| BPC-157 | 15-residue linear synthetic peptide, C₆₂H₉₈N₁₆O₂₂, 1,419.53 g/mol |
| TB-500 | 7-residue N-acetylated synthetic peptide, C₃₈H₆₈N₁₀O₁₄, approx. 889.0 g/mol |
| Net Content | 20 mg total per vial (component quantities stated on the label and COA) |
| Appearance | White lyophilized powder |
| Purity | ≥99% (HPLC, each component) |
| Form | Lyophilized powder, sealed glass vial, not reconstituted |
Three features of the blend are relevant to solution preparation, chromatography and mass spectrometry in the laboratory.
Two Resolved Components
The two peptides differ about 1.6-fold in mass and differ in hydrophobicity and net charge (BPC-157 about -2, TB-500 about 0 at neutral pH). They are baseline-resolved by reversed-phase HPLC, so each can be quantified from a single injection.
Detection
Neither component contains tryptophan or tyrosine, so neither can be quantified at 280 nm. Use low-wavelength UV (210 to 214 nm) or mass spectrometry. Principal ions: BPC-157 m/z 1,420.5 [M+H]+ and 710.8 [M+2H]2+; TB-500 m/z 890.0 [M+H]+ and 445.5 [M+2H]2+.
Solution Behavior
Both components are freely water-soluble. BPC-157 is proline-rich (4 of 15 residues) and acidic, and is retained by anion-exchange media. The C-terminal glutamine of TB-500 is susceptible to slow deamidation (+1 Da) in solution, so prepared solutions should be used promptly.
Every lot is tested by an independent third-party laboratory. The tests below correspond to the results reported on the Certificate of Analysis linked on this page. Refer to the certificate for the values for the specific lot.
Purity (HPLC)
Reversed-phase HPLC with low-wavelength UV detection. Specification ≥99% by peak area for each component.
Net Content
Content of each component per vial determined by HPLC peak area against the labeled quantity. Specification 90–115% of label claim.
Appearance
Visual inspection of the lyophilized material against the specification of a white lyophilized powder.
Certificate Verification
Each certificate carries a verification code that can be checked directly on the issuing laboratory’s website.
Storage Conditions
Lyophilized (powder): -20°C, protected from light and moisture. Stable for 24+ months under recommended conditions.
Handling: allow the sealed vial to reach room temperature before opening to avoid condensation. Prepared laboratory solutions should be protected from light and used promptly; avoid repeated freeze-thaw cycles.
Product Summary
- Two synthetic peptides co-lyophilized in one sealed vial, 20 mg total
- Fixed component ratio, each component quantified separately by HPLC
- ≥99% purity specification per component (HPLC)
- Third-party tested by Amino Metrics
- Certificate of Analysis published on this page
⚠️ Research Notice
This product is for laboratory and research use only. It is not intended for human or veterinary use and is not intended to diagnose, treat, cure, or prevent any disease. This product is not a pharmaceutical product and is not sold for any clinical indication.
All analytical information on this page is sourced from the product’s Certificate of Analysis. It is provided for educational reference only and should not be interpreted as medical advice or product claims.
By purchasing this product, you confirm that you are a qualified researcher and that this product will be used strictly for in-vitro research purposes in compliance with all applicable laws and regulations.




